Announcement

Collapse
No announcement yet.

Teensy 4.0

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Teensy 4.0

    I was just reading that teensy 4.0 is coming out in the same form factor used by euro-shield, will we be able to use this with the euro-shield?

    https://www.pjrc.com/store/teensy40.html

  • #2
    We just received a Teensy 4.0. I am sorry to report it is not compatible with the Euroshield. The pins used for interfacing with the audio codec have moved compared with Teensy 3.x. We will investigate further.

    Comment


    • jeremysykes
      jeremysykes commented
      Editing a comment
      Thanks for the update!

  • #3
    Would it be possible to make an adaptor with a small perf board, an IC socket, some header pins and a bit of wiring?

    Comment


    • #4
      Originally posted by NeoNeo View Post
      Would it be possible to make an adaptor with a small perf board, an IC socket, some header pins and a bit of wiring?
      Thanks for the idea. We will consider it.

      Comment


      • #5
        well, if you ever come up with a solution: I'm interested as well.

        Comment


        • #6
          The Teensy 4 has a few pin conflicts with the Eurosheild and Teensy 3. Specifically, the two pins we use for the pots on Teensy 3 are part of the serial audio interface on Teensy 4. To make it all work together would require remapping about 7 pins and changing the sample code.

          I'm sorry there is no easy answer here.

          Comment

          Working...
          X