Announcement

Collapse
No announcement yet.

Project reload - Easy to implement, goldmine for playing live

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
    stimming
    Junior Member

  • stimming
    commented on 's reply
    yeah, you're right - its an assumption, especially without knowing the hardware specs. but from the software and logic side its not magic at all while practically it would make a huge difference.
  • Lacrymology
    Junior Member

  • Lacrymology
    replied
    "easy to implement" is a huge assumption there. It will depend on whether the box had enough free ram to hold two complete sets of params. Shouldn't be too much, but I wouldn't assume it

    Leave a comment:

  • gein
    Junior Member

  • gein
    replied
    I would love this feature

    Leave a comment:

  • Airyck
    Junior Member

  • Airyck
    replied
    +1

    Similar to the save(current state) and reload functions on most Elektron boxes. But in this case even just the reload function would be very useful for performing.

    Leave a comment:

  • Laryngo Scope
    Junior Member

  • Laryngo Scope
    replied
    Absolutely, this would make the bluebox being playable instead of a set up and forget box. The x y pads for the effects could be also set up for more momentary control, so that they fall/set back to the original state when the pad is not touched.

    Leave a comment:

  • stimming
    Junior Member

  • Project reload - Easy to implement, goldmine for playing live

    while I am preparing the sets for this year (even when its not gonna be much ) I figured a very easy to implement feature with an incredible usefulness:

    I need an ability to reload a project as soon as something has changed.
    its basically only the load button being able to be used to load the same project I'm in - while playing.

    why? imagine using the eqs, mixing, effects inside a break or a situation during live-play where a bold performer wants to go but needing to dial everything back to where it was is basically impossible. yeah, of course you can map everything to a midi controller but then you need more space and another piece of gear.
    instead: just a click to the project button and an even quickier push to "load" (or maybe call it "reload" then?) and you're back in the saved state. and with save I also mean "safe" state.

    its like the "function + no" function on the elektrons, or ableton live's ability to jump back to a certain state with the touch of an assigned button.

    easy to implement (I suppose) but very, very useful. I mean, the will make the difference between a small and good sounding mixer with record function and a real performance tool for me!



    give me thumps up to help make them implement it!!

Working...
X