EXT inputs issue

[Liradigital]

Hello. Before all, Thanks for this great module which I am enjoying a lot.

I would like to know if is it known the following issue:

With firmware 2.0.1

I am using the default preset of 808 samples.

When I use EXT1 and EXT2 inputs to assign an lfo to the panning of some cells,

other cells (with no cv assignments or triggers) are shoted

I am using TTLFO from Gynko Synthese and enable -5v/+5v option

when I unpatch the cable from EXT1 and EXT2 the triggers stop. Consequently I asummed that

these shots are caused for the EXT inputs.

I attached a video that shows this issue.

Some idea to solve it?

Thanks

Manuel

[Aaron]

It sounds like the EXT1 and EXT2 cells are set to scene triggers. Please do the following:

1) Touch EXT1
2) Press Info
3) Set the Mod: to Custom

Let me know if this does not help.

[Liradigital]

Thanks, that fixed it.
Sorry for the delay. I had no set up my notifications by email.
Thaks for the support

[Liradigital]

Hello again. Just now I was using Beatstep Pro and I realized that some "phantom triggers" was ocurring.
Is it possible because a wrong Beatstep setting?
I attached a video
Thanks

[Aaron]

Sorry to hear about the problems. I am not able to see the video. Would you please check the link?

[Liradigital]

Sorry
Could you please try again?
Thanks

https://www.dropbox.com/s/t0frvmduhs...%2038.mov?dl=0

[Aaron]

Thanks for the video. That sure looks like a BeatStep Pro problem or misunderstanding to me. Is there data on the other two tracks? The stuff that continues to play at the end is not shown in the drum sequence at the beginning.

[Liradigital]

It solved it.
You were right. One of the other two tracks were sharing the midi channel 10.
Thanks so much for your time.
cheers!!