Announcement

Collapse
No announcement yet.

seq trigerring via midi gate signal

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • seq trigerring via midi gate signal

    Dear team,

    I have a few difficulties triggering sequences on Blackbox from Arturia beatsteppro via midi, namely:

    1) blackbox seems to switch state of the sequence on "Note on" command only (on to off and vice versa).
    2) Arturia has "gate mode" for pads where pad stays lit between "note on" and "note off" commands, which are triggered by two independant interactions with the device.

    These two together create a following mess:

    On first beatsteppro pad hit:
    -Pad gets lit
    -"Note on" command is sent to Blackbox
    -Sequence toggles on.

    On second beatsteppro pad hit:
    -Pad gets unlit
    -"Note off" command is sent to Blackbox.... which does nothing.

    On third beatsteppro pad hit:
    -Pad gets lit
    -"Note on" command is sent to Blackbox
    -Sequence toggles off.

    As a result, there's no correlation between state of pad LED and sequence state, as pad LED can be lit each way.

    Could i ask for a "gate seq trig mode", where both "note on" and " note off" commands trigger change of sequence state (on to off and vice versa) ?

    Sorry for a slight offtop, if it is one.
Working...
X