Announcement

Collapse
No announcement yet.

Fxbox 2.0 discussion

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • glennfin
    replied
    The manual says the wet reverb signal is available via FX1 and FX2 outputs..... it is not.

    Leave a comment:


  • fezziwig
    replied
    Thank you for the time u use in this...
    Kodi Lucky Patcher
    Last edited by fezziwig; 10-25-2019, 06:01 AM.

    Leave a comment:


  • Christine
    commented on 's reply
    It's available now. Sorry for the delay. Here's the link: https://1010music.com/fxbox-documentation

  • Christine
    replied
    At long last, the Fxbox 2.0 User Manual is now available. You can download it here: https://1010music.com/fxbox-documentation

    Leave a comment:


  • Christine
    commented on 's reply
    It's under review. Sorry for the delay.

  • Christine
    commented on 's reply
    Sorry to hear about this. I will ask Aaron to take a look at it. We have may overlooked this as we were traveling in November. I apologize for the delay.

    -Have a mode to toggle an effect on/off by pad tap or MIDI note. Right now the effect is only on as long as you hold the pad or it latches on without the option to latch it off."

    How is this request different from bypass mode?

    We have no plans to allow users to tweak or build firmware for our series 1 or series 2 modules. However, we suggest you check out our euroshield module if you want to create your own firmware.

    Thanks for the input, especially the bug reports.

  • Patate le mage
    replied
    Thank you so much for those greats improvments, now i love it....

    Leave a comment:


  • hybridartslab
    replied
    We just started using the fxbox and after updating to 2.0.3, noticed some problems.
    -Triggering pads by MIDI note input no longer works except for the lower right PLAY pad
    -GlobalMIDI channel in Settings has no effect; MIDI responds on Channel 10 regardless of setting.

    (These seem like big oversights and it would be great to get a hotfix)

    Some improvement requests that would mean a lot to us are:
    -Have a mode to toggle an effect on/off by pad tap or MIDI note. Right now the effect is only on as long as you hold the pad or it latches on without the option to latch it off.
    -Be able to save the Bypass Mode state in the preset. This could possibly substitute for the toggle feature because you could save them in Trigger: On and toggle them with Bypass.
    -Be able to load presets with MIDI Program Change messages
    -It could be nice to have something under the INFO for the EXT pads. Perhaps an Amount% multiplier

    Is there any possibility to tweak and build our own firmware? This would really open up the possibilities.

    Thanks!

    Leave a comment:


  • qbassa
    replied
    Is there a new manual for fxbox 2?

    Leave a comment:


  • Tonefloat01
    replied
    I haven't used any FXBox software until tonight when I installed the 2.03 (?) Beta version.
    I really like all of the algorithms actually but especially the Pitch, Delay, Chorus and Rverse.
    Wouldn't mind the Distortion being a little more hard-core like a Geiger Counter or Plague Bearer if I could wish for more.
    Regardless, fantastic work! - OMG The XY PAD functionality is killer!
    Last edited by Tonefloat01; 09-10-2018, 08:31 PM. Reason: just tried out the XY PAD

    Leave a comment:


  • Dan
    replied
    Thanks for restoring the X/Y pad! That is one of my favourite features of the module.

    This new update has really opened up the possibilities for sound design. I'm really digging it!

    Definitely lose the compressor on Chain A, though. I'd much prefer both chains to behave identically.

    Leave a comment:


  • sephult
    commented on 's reply
    Maybe I am confused, but I remember the Distortion in previous version as having a really hard compression...as you turned the distortion up...the compression just brought the level down a ton.....I'll revisit but I swore I had it crunching and blaring like I was expecting. No additional parameters, but curious if the limiting or compression was modified. Maybe it was the chain that I was using, but I am pretty sure it was fixed compared to older version (no changes besides output).

  • Aaron
    replied
    Originally posted by digitalohm View Post
    can a single stereo input using both L/R go through separate chains out 2 sets of stereo outputs?
    Yes, you can route the same stereo signal to both chains.

    Leave a comment:


  • digitalohm
    replied
    can a single stereo input using both L/R go through separate chains out 2 sets of stereo outputs?

    Leave a comment:


  • Aaron
    replied
    Originally posted by digitalohm View Post

    was there an update to the distortion algorithms as well?
    No, the distortion is the same. Sephult is enjoying the ability to combine it with other elements and take it to the next level as a group.

    Leave a comment:

Working...
X