Announcement

Collapse
No announcement yet.

Recommendation - TRS Cables for MIDI and Stereo Audio

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Recommendation - TRS Cables for MIDI and Stereo Audio

    1010music products use TRS cables for MIDI connections and for stereo audio connections. If you are using TRS for MIDI, you should be aware that there are two different standards used for TRS for MIDI and you need to use an adapter if you are connecting two devices that use different standards. Read our KB article about TRS MIDI to learn more about this.

    The same cables can be used for TRS MIDI and TRS stereo audio. For TRS stereo audio you may also want a cable that breaks the signal out to two different mono connections with the left and right channel split between them. This can allow you to connect two mono audio signals to one stereo audio jack. With some of our products, the jacks are close together so you need to find cables with small heads. Here is a list of cables that we have tried that work. There are many other cables out there that will work, this is just a list to get you started.
    3.5 mm Stereo Breakout
    by cablesonline.com
    3.5 mm
    dual mono
    3 ft Amazon
    3.5 mm Stereo Breakout
    by cablesonline.com
    3.5 mm
    dual mono
    6 ft Amazon
    TRS mini stereo to dual 1/4″
    Heavily braided cable
    by UGREEN
    1/4″ TS
    dual mono
    3 ft, 6 ft, 10 ft, 15 ft Amazon
    UGREEN
    3.5 mm TRS Patch Cables
    by 1010music
    3.5 mm
    TRS stereo
    30 cm, 60 cm 1010music
    TRS to MIDI 5 Pin DIN
    by 1010music
    Male MIDI
    5 Pin DIN
    4 ft 1010music
    TRS to MIDI 5 Pin DIN
    by 1010music
    Female MIDI
    5 Pin DIN
    22 cm (8.5″) 1010music
Working...
X
😀
🥰
🤢
😎
😡
👍
👎