Lemondrop 1.2 Feedback

[Steve]

PGM change does not respond to bank messages. Messages are loaded from 0-127 as they appear alphabetically in the list. Long push Home to reach the teleport screen - then release the home button. Touch the button on the screen.

[shorvin_ketz]

How to do Program Changes step by step? It is not obvious, at all. There is no information about it. Could it be done with Razzmatazz?

[Steve]

Enable MIDI ProgChg in nanobox config settings. Send MIDI Pgm change messages 0 - 127. PGM message '0' will load the first preset in the list. The one at the top of the list. As you increment the PGM messages, the box will load the next preset in the list.

[flocolores]

Enable MIDI ProgChg in nanobox config settings. Send MIDI Pgm change messages 0 - 127. PGM message '0' will load the first preset in the list. The one at the top of the list. As you increment the PGM messages, the box will load the next preset in the list.

Oh, you have to enable it...yes, now it works with the Deluge. You should really include this in the PDF!...

[Mindtraveller]

As some people were experiencing clicking artefacts with the new grain shapes, I would suggest to make the edges of the ramp up and ramp down shapes not 100% sharp but a bit smoother to make them more usable.

[mrjayjayjay]

+1 I especially like the ramp up - backwards sounds are always intriguing - but the clicking is often prohibitive

[Nebula]

cool update and features but when i load my new patches (from the beta firmware) they sound nothing like the way they did when i saved them, old patches from the last firmware still sound the same

[rhombus]

Thanks for a new lemondrop firmware! I just discovered it but haven't tried everything yet. The teleporter is a great feature! I'm looking forward to using Grain Shape also!

[BurkiBoarder]

After firmware update to 1.2 most (if not all) patches are detuned. The third oscillator is out of pitch and detuned around 2 semitones. It sounds terrible.

I kept the NANOLEM.BIN on my micro SD card, renamed it to NANOLEM1 and copied the new firmware on it.

Now I am able to switch between the two firmwares easily.

With 1.12 the patches sounding normal (lovely).

With 1.2 the patches sounding detuned (terrible).

Why is this happening? I also want to use the new firmware version 1.2...

Please help???

[Steve]

After firmware update to 1.2 most (if not all) patches are detuned. The third oscillator is out of pitch and detuned around 2 semitones. It sounds terrible.

Please either contact us directly or provide more details. Which presets, specifically, are you referring to? Which controller are you using, etc? I just spot-checked a few presets, including the sub osc (separately), and do not see this on my end.

[BurkiBoarder]

Please either contact us directly or provide more details. Which presets, specifically, are you referring to? Which controller are you using, etc? I just spot-checked a few presets, including the sub osc (separately), and do not see this on my end.

It's absolute obvious, because if I swap to the new firmware 1.21, it sounds detuned, immediately after loading the patch.

I have restored the micro SD card contents from this website, before my second test, right now, to start fresh from beginning.

Here is the video:

If I swap back to firmaware 1.12, it sounds not detuned, playing chords is easy and nice. Everything normal.

It's absolutely obvious. I found the problem in oscillator GR2. I had to tune it 2 semitones up, to get normal sound.

[Steve]

Thanks for the report. We will fix this.

[Aaron]

Version 1.2.2 is now available. It fixes the intonation problems with some factory presets. Thanks for reporting this issue.

[BurkiBoarder]

Thank you for your fast response. I have modified my YouTube video, to make clear, that only version 1.2.1 is affected, and version 1.2.2 fixed the issue.

[ukaeatech]

Cor blimey looks awesome ♡♡♡♡

[jandtch]

I just upgraded from 1.1.2 to 1.2.2beta, created a new preset (i.e. file) and started to load samples etc. - all good, but one minor display issue: on the FX1 screen, the name of the "Flanger+Dist" effect is shown as "(null)" in the title bar. Effect seems to be working, AFAICT, has the relevant paremeters etc., but somehow its name isn't shown properly. For the other effects it works as expected, it's just this one where that glitch occurs. Nothing big, I still thought I should report it.

[Steve]

Thanks for reporting this. We also found this on our end.

[rockysmalls]

can confirm here. flange-dist shows as (null)

[Nebula]

well it happened again this time with firmware 1.1.2, i saved my patch i had worked so hard on only to load it later and it was just the stock preset, did i screw something up by loading the beta firmware?