No announcement yet.

Bitbox Mk2 multi-sample questions

  • Filter
  • Time
  • Show
Clear All
new posts

  • Steve
    commented on 's reply
    Aaron recently posted all of the WAV tags we use. Your entire explanation is correct except that filenames are for reference only. We do not use them to load/parse multisample sets.

    the MK2 does not multisample velocity. I will pass along the needed additions/edits to the Mk2 manual. thanks for posting this.

  • Trinkit
    1. Yes each pad can be set to a different mode.

    2. Currently there is no way to expand to midi out, nor do I think a firmware upgrade could change this. I say that because I believe the output jacks are 1/8" ts mono, not trs stereo, which is required for an 1/8" midi connection. The midi input jack must be a stereo jack though, so it's possible that others are as well. Auto-sampling is limited to cv gate length and pitch, so no velocity.

    3. Regarding Velocity, the BitBox Micro (and I assume the MK2 as well) appends the midi note number and velocity onto the end of the file name when auto-sampling, such as "filename-036-050" "filename-036-100". That would be note 36 with velocities 50 and 100. The note and velocity number are for user reference only (I believe), which the BitBox is really reading from the "WAV inst" tag (see below) Velocity range cannot be set manually on the BitBox, but "Root" can. Also there is no round robin feature currently.

    I've yet to try in setup velocity multi samples though, and have gotten along with just the using keyboard velocity to control the one sample per note. It is clearly possible via auto-sampling on the BitBox Micro, though setting this up manually is not well documented. The MK2 manual has no details about velocity layers, I assume it functions the sample as the Micro with reading the file tags though. It is possible that the velocity info is read from the filename, which would make this process easier, though it is unlikely.

    From an old Beatbox MK1 post...
    "We use this tag for root note information when loading multisamples

    WAV inst tag

    We just started reading and writing this tag on multisample recording introduced in the past few weeks. It includes key range and velocity range.

    WAV acid tag

    This tag contains the beat count used in clips

    WAV cue points

    This tag represents markers in the file, which we interpret as slice points.

    Leave a comment:

  • Jon Haines
    Can I auto sample a multisample on BitBox 2.0 like you can with a Bitbox Micro? >> As described on page 43 of the Bitbox Micro Manual - Auto-Sample a Multi-sample Pack

    Leave a comment:

  • takoyaki
    Id also like to know about preparing WAV files for multi-sampling. Im getting better results exporting from logic and renaming with the midi note number. eg. Piano-024.
    The notes are mapped incorrectly though when putting the sd back in and running the files.

    Leave a comment:

  • Hipponipple
    started a topic Bitbox Mk2 multi-sample questions

    Bitbox Mk2 multi-sample questions

    Hello, I am very interested in a Bitbox Mk2 for use with multi-samples, and have a few questions.

    1 – Can I configure the sample pads with different playback modes. Eg, pad 1 is a single sample, pad 2 a multi-sample, pad 3 a sliced loop? The 3.0 manual suggests this is the case, just making sure. If so, I guess the only bottleneck is polyphony and RAM?

    2 – Is there a way to expand Bitbox Mk2 with midi out, and/or can CV/gate somehow be used to multi-sample velocity and round-robins?

    3 – How to prepare a folder of wavs for Bitbox to recognise it as a multi-sample kit? The 3.0 manual only speaks of adding multiple files into a folder, but how to make sure it recognises and maps different velocities and round robins per note? Is there a naming convention to use when preparing samples for this?