User Profile

[Steve]

Please always share your firmware version -- as a number. It's always relevant. That said, how are you triggering the sliced pad? Global MIDI or pad-level MIDI?...

[Steve]

2 channels of audio. The USB sent is from the main output. You can send stereo or dual mono.

[Steve]

The directory (folder) you are referring to here. It can sometimes help if we can look at the files that are not loading properly....

[Steve]

The OUT port is, at this time, a MIDI Thru. MIDI Out is fixed to type B on our devices. All our devices, except blackbox, automatically accept type A or B....

[Steve]

The Length flag (the right pink flag) on the waveform overview does move with the Start flag (left pink flag). Both can be assigned to MIDI CC. You can assign a modulation source to any parameter with the 3 smaller boxes to the right of the parameter...

[Steve]

Unfortunately, it does not. This request does exist on the wishlist. Please search and +1 the existing request....

[Steve]

warth0g please share your firmware version as a number. Next, consider sharing the directory in question....

[Steve]

You need to set the actual pan parameter to -100%. In this case, 0-127 will control as you'd expect. You do not need to adjust the 'amount' unless you want a different behavior than a traditional pan.

[Steve]

Please always share your firmware version - as a number. Next, please share your Slicer settings. Are you triggering via the Global In or pad-level MIDI?...

[Steve]

It works, but you must start at bar 1 beat 1. Blackbox does not interpret SPP (song position pointer)....

[Steve]

Thanks for reporting....

[Steve]

If you send the Pad Note over the Global In channel, you can use the slice sequencer or the Slice parameter to change slicers. The Slice param should accept modulation. You can also play specific slices using the pad-level MIDI input and sending notes...

[Steve]

The blackbox, like our other samplers, streams the audio from the microSD card. So, it does put quite a new load on the memory and CPU. And depending on the actual size and length of the wav files loaded, plus the wav files you are attempting to load,...

[Steve]

Are you capturing Pre or Post fader?...

[Steve]

No, it is a bug. Our samplers use a (mostly) shared code base; sometimes, when updating one, little things creep into the others. We logged this previously and will fix it as soon as we return to Micro....

[Steve]

use copy & paste for this

[Steve]

The idea is to use a MIDI controller while PLAY is enabled. Turn a knob to change/audition presets. When you find one you like, touch Load....

[Steve]

We have acknowledged this and will fix it.

[Steve]

This may be an audio calibration issue. If this persists, please use the contact link at the top of this page to open aa support ticket....

[Steve]

No worries. This request exists for most of our products.