strange crunching in bass frequencies when sustain and decay are turned down

[rodelberg]

hey, does anyone else have the problem that it always produces a strange crunch - noise sound when you turn down decay and sustain? it's especially noticeable at low frequencies. i'm using version 3 and first had the problem when sampling from the minimoog....

[jonlemon]

Bug: When releasing the sustain pedal also notes are killed that are still held down.

(See https://forum.1010music.com/forum/products/nano-box-product-discussions/nanobox-fireball-compact-wavetable-synthesizer/support-fireball/31110-bug...

[frank-the-bassman]

Hi!

I may have found a bug in the midi import. I am on firmware 2.1.5.

I added two demo midi files (in Archive.zip) which should make it easy to recreate the bug (at least I hope so).

It seems to occur when too...

[caniffe]

I've looked through the forums to see if anyone else has had this issue, but I seem to be the only one (or I'm not good at searching the forums).

I'm using the Bluebox as a multitrack recorder, recording different inputs from my modular...

[jocphx]

Hi,
I'm still on 2.1.3, I just got the Micro today.

I noticed that when a pad is a Clip, loop on, toggle or trigger, and I display Keys, press a few keys on the b/w keyboard, then I go back Hone, the pad no longer displays the sample's...

[joeshi]

Has anyone experienced samples distorting or changing character (as if it's FM) or whatever, after a certain period of time? I've found that I can load up a sample (example a flute note) and then have CV elsewhere control the pitch, and everything sounds...

[Glentek212]

Hi there,

I use long samples of performances. On all machines, bitbox, microbox and blackbox, the samples start to distort more and more until you can hear nothing from the sample anymore. The problem always occurs after around 8 to 10 minutes,...

[schizophonicmusic]

The Bluebox does not appear to save the Cue Out send settings when I save the preset. Even if I set all CUE settings to off on all tracks, when I load the preset, the CUE send is at 0 db on all tracks, even though the display shows the setting that I...

[joeshi]

Difficult to find a title for this question, however, the problem is simple. I often record a sample (in this case a chord from a synth) which records no problem. In the first instance the sample plays back as a clip straight away - as it should. However,...

[tsubasa.k111]

Situation:
I am building a tech house track, and I am choosing to use long (32 bar) sections as I would otherwise run out of sections.
Whenever I screw up a take and decide to clear a section, the bar length of the section resets.
...

[[email protected]]

Hello. I have the bluebox and blackbox. Im very happy with the boxes, but i think the black box have a midi + other gear issue. Its cind of hard to reproduce this but what happens is: i sync the box with my digitakt, sending triggers and clock to blackbox....

[GaelVig]

Hello,

Sorry if this was already mentioned, but the RecToPlay function, although set to ON, doesn't launch playback after a New Rec. It does sometimes, but rarely, and I can't figure out why.

I guess this is a bug?
...

[peteandleo]

Hi there,

after a very helpful thread here on the forum I went along and loaded a bunch of samples (SFM) onto the SD card. In order to save some storage space, I chose to load only four notes per octave (generally C, D#, F# A). Fully aware...

[harmash]

Just bought the bb micro and found that there's no any reverb effect when turning up send . The delay is working without any problem. Oh, and the screen is flickering at any brightness.

[richmouthfeel]

Hey folks. A few months ago the bottom row of the touchsreen stopped responding. This is the vol / gain / solo etc area. The rest of the screen seems to respond 90% of the time but there is often a delay in selection. I am running the most recent firmware,...